On this page you can find all the information you need to set up your Exhibition Stand for World PM2022.

This page will be continually updated throughout the year with new information, but if you have any urgent questions, or require information not present on this page, please get in touch at exhibition@epma.com.

Lyon Congress Centre Information

General information about Exhibiting in Lyon can be found below. Any queries or onsite orders for the Lyon Congress Centre can be sent to expo@ccc-lyon.com

Congress Centre Guidelines
Onsite Services
General Congress Centre Information

Shell Scheme Exhibitor Information

Our shell scheme stands in 2022 will be built by our long standing supplier StandOUT, and the document below can be used to help outline your stand design, order furniture, or customise your design with their bespoke offering.

You can submit the completed form  or any enquiries directly to StandOUT at katharina.wedam@standout.eu.

All shell scheme exhibitors will be required to complete at least Page 3 with their basic stand information by 4 September 2022.

Shell Scheme Stand Dressing Times:

Sunday 9 October – 15:00 – 17:00

Monday 10 October – 09:00 – 11:00

Dismantling Times:

Thursday 13 October – 15:00 – 17:00

Please note – all times are subject to change at this early stage. All items left on your stand after 17.00 will be deemed as waste and disposed of by the Congress Centre at your own cost. Please ensure all shipments are collected prior to 17.00, this can be arranged with EFM Logistics.

StandOUT Manual

Own Stand Builders

Those Exhibitors constructing their own stand will need to submit their full stand design for approval by the Lyon Congress Centre and their security team.

The deadline to submit these design is Friday 1 July 2022. Submit your design to exhibition@epma.com.

Additional services, such as elecrical connections, can be ordered from StandOUT using the form above.

General Design Guidelines:

  • The maximum build height is 3.5m
  • Electricy is provided overhead, and we will be able to confirm supply to specific areas of the stand once your design is submitted.

Stand Construction Times:

Saturday 8 October – 08:00 – 24:00

Sunday 9 October – 08:00 – 15:00

Stand Dressing Times:

Sunday 9 October – 15:00 – 17:00

Monday 10 October – 10:00 – 11:00

Stand Dismantling Times:

Thursday 13 October – 15:00 – 24:00 (The hall not be accessible after this time)

Please note – all times are subject to change at this early stage. All items left in the hall after 24:00 will be deemed as waste and disposed of by the Congress Centre at your own cost. Please ensure all shipments are collected prior to 24:00, this can be arranged with EFM Logistics.

Exhibition Opening Hours

Sunday 9 October – Welcome Reception – TBC

Monday 10 October – Exhibition & Poster Area Opens – 11:00 – 17:30

Poster Reception (Sponsored by Miba) – 17:30 – 19:30

Tuesday 11 October – Exhibition Opens – 09:00 – 17:00

Wednesday 12 October – Exhibition Opens – 09:00 – 17:00

Thursday 13 October – Exhibition Opens – 09:00 – 15:00

Please note – all times are subject to change at this early stage.

Exhibition Personnel Registration

Promotional Codes will be distributed to all Exhibitors to allow you to register your Exhibition team for the event. These will be available to all Exhibitors in time for the event registration to open in the Spring.

Freight Forwarding

World PM2022 logistics will be conducted by our Freight Partner, EFM Logistics.

Please contact Chris Knights at chris.knights@efm.global with your freight enquiries.

Industry Corner

World PM2022 Exhibitors get exclusive first access to reserving a corporate presentation slot in the heart of the Exhibition.

What is an Industry Corner?

• A 20-minute presentation on innovations or technological breakthroughs.
• At the end of the presentation, participants will have the opportunity to ask questions for 10 minutes

Please note that the Industry Corner meetings are reserved for the stand exhibitors only.
Submissions will be assessed and successful submissions will be allocated an appropriate place in the programme. Details of successful Campfire Meeting submissions will be confirmed by email in June and included in the Technical Programme.
This year, the Campfire Meetings will take place in the PM Forum inside the exhibition area.

Deadline to apply 01 June 2022 – Find out more and reserve your place today.

Industry Corner Information

The 2022 PM Component Awards

The EPMA is proud to present the prestigious EPMA 2022 Powder Metallurgy Component Awards, which over the years, have done much to promote and stimulate interest in PM technology. These awards are open to all who manufacture components made by PM processes.

Awards will be given among all parts submitted with a maximum of 4 awards.The 8 categories are:

  • Additive Manufacturing
  • Hot Isostatic Pressing
  • Metal Injection Moulding
  • Hardmetals
  • Cold Isostatic Pressed
  • Press and Sinter
  • Powder Forged
  • Others
Find Out More About The Competition

World PM2022 Media

You can download some essential graphics for use in your emails and social media below. Bespoke graphics can be designed to promote your attendance at the event by request to exhibition@epma.com.